Quick Start for BF10

Now you get the Smart hummingbird feeder, congrats!

 Before pairing, please take a minute to review the following important tips:

 1.Please install the micro sd card when the camera powered off.

(32gb memory card pre-loaded in the camera)

2.Please use the provided Type-C charging cable to charge the camera, a full charge usually takes 6 - 8 hours.

3.The PIR range is 18 feet around, the recommend camera install height is 9 feet around. To avoid too much false alarms, we suggest you do not install the camera nearby bushes, shrubs, grasses and tree leaves coming into the PIR range.

4.Please make sure that the feeder is placed in a semi-shaded area and not under direct sunlight. Intense heat will lead to sugar fermentation with in hours before the hummingbirds get a chance to taste it.

5.Please follow the instruction here when you fill the nectar in the bird feeder.

Let's start pair the camera to your phone app!

Note: Before installing your bird feeder and camera, please setup your camera first.

Here's a quick video, pairing in less than 1 minute!

Step1:

Go to your App Store or Google Play on your smartphone, search for "Soliom Pro" Or just scan the QR code below to download the app:

Then please sign up for a new account,please check the screen shot below for your reference:

CD Tap "Sign up for a new account"

① Input your user name,your country "the United State''. and your E-mail address. And then check on the "Agreement and Privacy Policy". Let's go to"Next Step"

②You will receive the Verification Code from your E-mail, put it in and then go to "Next Step" Set password for your account, and then go to"Done" Congratulation! You have already registered successfully. Let's hit the "+"icon to add the camera now!

Step2:

Press and hold the power button to start the camera,the light will flashing blue. Finally,you will hear a pairing sound from the camera,which means the camera is ready to connect.

①If you hear the sound from the camera, please go "Next Step".

②Searching for activated devices.

③Check to see if you hear a "ding dong ding dong" sound from the camera. if you hear Click "Next Step".

④Choose a connection method "Connect via WiFi".

⑤ Select your network and enter your WiFi password, then click "Next Step”

⑥ Hit "Confirm” please.

⑦ Wait for a second, you will see this page and the camera would say “WiFi connected”. You're almost done.

⑧ Use the camera lens to scan the QR code gennerated from the Soliom pro APP.

⑨ Check your WiFi signal strength,hit “Done”.

⑩ Here we go! Hit the “play”icon, you will see the camera image.

You have successfully connected your device to the app. Now you can set a password to log in,which can protect your privacy.The camera password should be longer than 8 characters, including numbers and letters. Please select "Non -Mainland China Users".

What should I do if I cannot successfully add the camera to the App?
1. Please make sure the WiFi network works normally (2.4G WiFi)
2. Reset the camera via the attached pin.
3. Turn the phone volume to the maximum.