How to Fill Your Hummingbird Feeder with Nectar and Prevent Leaks?

How to Fill in the Nectar for the BF10/BF06 Hummingbird feeder camera ?

Please ensure the white rubber gasket is completely flat inside the top lid.
Even a slight bend (about 1 cm) in the sealing ring can affect the seal.
Once it is properly flattened and the lid is tightened securely,
the flower side will not leak.

When hanging the feeder frame. Please do not tilt the feeder. That way, the flower port will not leak nectar.

Please try filling one porcelain plate with some nectar. Then place the plate near the feeder. Bees or Ants will eat nectar on that plate. This method will reduce bees or ants.

--

① Rotate to open the base of the bird feeder as the image.

② Upside down the bird feeder body and fill the nectar. Keep the bird feeder upside down and put the base on, then tighten it clockwise.

(Maximum capacity is 16 ounce)

③Flip the feeder back as the image shows.(Note：Please make sure the correct direction as image shows to prevent the liquid in the cavity from leaking out.)

How to Use the Hanging Hook and Ant Moat?

④ Put the hook in at the top of the feeder as image shows, Align the holes and screw in counterclockwise.

⑤ Pour some pure water in the top cover as a moat to keep ants out, then you can hang it in your garden.