How to Pair the Security Wifi Camera with Soliom + App?

Before Pairing, please ensure that your phone connect to the 2.4Ghz wifi before you pair the camera, make sure your router password in mind before you start the pairing process.
(1) Switch on/off button (on the solar panel) to turn on the camera. LED flashes blue. Then you will hear the following voice "The camera is now ready to begin pairing". That means your camera is in the status of ready to pair.

(2) Input a device name and device location on the "Device information" page, the camera located area will be recognized by your router network automatically.
Note:
When your phone or tablet connected well with your 2.4G wifi and you allow the full access of using the location for the app, your wifi name will be shown on the "Connect to Wifi" page automatically. Otherwise please check your wifi list from your mobile devices and you have to turn on the location services for the Soliom+.

(3) Input the CORRECT WiFi password of your router, if you input a wrong password you will not be able to connect it successfully.Click the eye icon to double confirm the password you entered correct.

Here Are 3 Methods of Pairing Wifi Security Camera!

Method 1: QR code configuration
(1) Click the "QR code configuratin", hold the QR code showing on the mobile phone in front of the camera lens, and then you will hear the following voice "Pairing Information Received".

Method 2: Sound wave configuration
(1) Enter into the "Connect to Wi-Fi" page, make sure to turn up your phone's volume to the Maximum, you will hear the following voice: "Pairing lnformation Received" after the configure process completed to 100%.

Method 3: Bluetooth connection
(1) Before the connection please make sure the Bluetooth is turned on.
(2) When the camera blue indicator flashes ,put the phone near the camera and click "Add a device", when the app shows message: "New device found. Do you want to configure it" please click ok. After that please input the WIFI password and click "Configuring devices".
(3) If connection fail,please step to Method 1.